Individual Railings 2ft. to 10ft.

Individual Railings 2ft. to 10ft.

Individual Railings (Fixed & Adjustable Lengths) for the Steel Non-penetrating Guardrail System setup. Choose from sizes of 2ft. up to 10ft. and Finishes of Powder Coated Safety Yellow or Galvanized. Base Plates/Counterweights are not included with these individual railings.

Add (2) rail/locking pins per Rail. Example: (8) Rails require (16) Rail Pins to be included.

  • System Description
  • Models
  • Downloads
  • Accessories

Description

Individual Railings (Fixed & Adjustable Lengths) for the Steel Non-penetrating Guardrail System setup. Choose from sizes of 2ft. up to 10ft. and Finishes of Powder Coated Safety Yellow or Galvanized. Pipe sections are 1 1/4” schedule 40 pipe. Base Plates/Counterweights are not included with individual railings, please purchase separately in the ‘Accessories’ tab.

“CAL-OSHA” COMPLIANCE: As per California OSHA Standards, railings must not exceed a recommended distance of 8 feet (96 inches or 2.44 meters) without the support of a base plate/counterweight. Please choose rails no more than 8ft. in length if you are installing this system in California. View on CA.gov

Add (2) locking pins per Rail. Example: (8) Rails require (16) Rail Pins to be included. Failure to include enough rail pins with your rails will result in the system being non-compliant.

This accessory must be used in conjunction with the Steel Non-penetrating Guardrails system only.


Our Steel Non-penetrating Guardrails enables fall protection without penetrating the floor and roof surface. When properly applied the counterweight system provides an OSHA compliant fall prevention system (1910.23(c)) for the roof edge, skylight, hatch, loading dock, mezzanine, elevated platform and construction site safety.

The Steel Guardrail System is a freestanding, non-penetrating railing system used for fall protection. It is designed to be a Motion Stopping Safety System thereby acting as a barrier between the worker and a fall hazard. This system will comply with all Federal OSHA standards found in 1926.500-503 and 1910.23.

!! CAUTION !! This is a fall protection system. The system must be used in strict conformance with the manufacturer's instructions. Failure to do so may result in serious injury or death. You can download the system manuals from the 'Downloads' tab. You are also encouraged to contact us in case of any questions. Contact us

Rail Length Finish Lead Time
2 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks)
2.5 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks)
3 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks)
3.7 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks)
4 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks)
4.3 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks)
5.5 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks)
5.7 ft. (Fixed length) Galvanized Not normally stocked – (Allow 3-4 weeks)
6 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks)
6.5 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks)
7 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks)
8.5 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks) — Not “CAL-OSHA” compliant **
9 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks) — Not “CAL-OSHA” compliant **
9.7 ft. (Fixed length) Powder Coated Safety Yellow Not normally stocked – (Allow 3-4 weeks) — Not “CAL-OSHA” compliant **
5 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Not normally stocked – (Allow 3-4 weeks)
7.5 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Normally Stocked
8 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Normally Stocked
10 ft. (Fixed length) Powder Coated Safety Yellow / Galvanized Normally Stocked
4.5 ft. – 3.5 ft. (Adjustable length) Powder Coated Safety Yellow / Galvanized Normally Stocked
5.5 ft. – 4.5 ft. (Adjustable length) Powder Coated Safety Yellow / Galvanized Normally Stocked
7.5 ft. – 5.5 ft. (Adjustable length) Powder Coated Safety Yellow / Galvanized Normally Stocked
10 ft. – 7.5 ft. (Adjustable length) Powder Coated Safety Yellow / Galvanized Normally Stocked

** Not “CAL-OSHA” compliant: As per CAL-OSHA, base plates have to be placed not more than a recommended distance of 8 feet (96 inches or 2.44 meters) apart or less. Please choose rails not more than 8ft. in length if you are installing this system in California. View on CA.gov