Roof Non-penetrating Hatch Guard

Roof Non-penetrating Hatch Guard

CAI’s Roof Hatch Guard protects against falls through a open roof hatch on flat roofs. Our OSHA compliant non-penetrating Roof Hatch guards do not require roof curbs or hatch penetrations for install. The Hatch Guard finish is Powdercoat Safety Yellow. To order for Galvanized finish, please call us or contact us.

Please Note: If your hatch dimensions are not listed below, please call us or contact us and we can provide you with custom sizes and pricing as per your specification.

SKU: SRC-RHG Category: Tag:
  • System Description
  • Models
  • Loading Zone Dimensions
  • Measuring a Hatch Guard
  • Downloads
  • Contact Us

Description

Roof Hatch Guard DimensionsCAI’s Roof Hatch Guard protects against falls through a open roof hatch on flat roofs. Our OSHA compliant non-penetrating Roof Hatch guards do not require roof curbs or hatch penetrations for install. The Hatch Guard finish is Powdercoat Safety Yellow. To order for Galvanized finish, please call us or contact us.

The hatch system is your first line of defense against a fall through a roof hatch on flat roofs. Roof hatch openings on flat commercial roofs are an important feature in building design. When access to the roof is needed, roof hatch openings are often more convenient than portable or fixed ladders placed on the outside of buildings.

Roof hatches that are left open for access or ventilation pose a major fall hazard to personnel. The problem is so serious that OSHA requires that all unprotected holes are to be guarded by fall protection systems. The other major source of personnel injury is when climbing out on into the hatches and to address that challenge our Roof Hatch Guards provide a safe work zone and grab bars.

Our Roof Hatch Guard comes standard with a 2 feet safe landing zone to allow the user to climb out of the hatch, gain their footing and then open the safety gate. All our Hatch Guards are equipped with grab bars to provide the worker a proper gripping means for climbing out or in to the hatch.

TIP: See the ‘Loading Zone Dimensions‘ tab in the tab section below for dimension reference.



FEATURES & BENEFITS

  • OSHA compliant fall protection
  • One-piece design – no assembly required
  • Powdercoat Safety Yellow finish. For Galvanized finish, please call us or contact us.
  • No drilling into hatch or roof
  • Self-closing gate included
  • 24” safe landing zone
  • Built-in grab bars
  • OSHA Regulations: 29 CFR 1910.23 Guarding Floor and Wall Openings, 29 CFR 1926.501 (b) (4), 29 CFR 1926.502

!! CAUTION !! This is a fall protection system. The system must be used in strict conformance with the manufacturer's instructions. Failure to do so may result in serious injury or death. You can download the system manuals from the 'Downloads' tab. You are also encouraged to contact us in case of any questions. more info

If your hatch dimensions are not listed below, please call us or contact us and we can provide you with custom sizes and pricing as per your specification.

Item # (SKU) System Type System Finish Hatch Dimensions (W x L) Weight (lbs.)
SRC-401018 4-Piece Modular Unit Powdercoat Safety Yellow 36″ x 42″ with 36″ Gate 175
SRC-401020 4-Piece Modular Unit Powdercoat Safety Yellow 36″ x 58″ with 36″ Gate 195
SRC-401022 4-Piece Modular Unit Powdercoat Safety Yellow 36″ x 110″ with 36″ Gate 259
SRC-401039 4-Piece Modular Unit Powdercoat Safety Yellow 42″ x 42″ with 42″ Gate 185
SRC-500-20-CUSTM1 4-Piece Modular Unit Powdercoat Safety Yellow 42″ x 72″ with 42″ Gate 185
SRC-500-20-CUSTM2 4-Piece Modular Unit Powdercoat Safety Yellow 53″ x 53″ with 53″ Gate 185
SRC-401019 4-Piece Modular Unit Galvanized 36″ x 42″ with 36″ Gate 175
SRC-401021 4-Piece Modular Unit Galvanized 36″ x 58″ with 36″ Gate 195
SRC-401023 4-Piece Modular Unit Galvanized 36″ x 110″ with 36″ Gate 259
SRC-401039 4-Piece Modular Unit Galvanized 42″ x 42″ with 42″ Gate 185

Roof Hatch Guard Dimensions

Measuring a Hatch Guard

You've just added this product to the cart: