Pallet Self-Closing Safety Gate

The Pallet Self-Closing Mezzanine Safety Gate is the answer for your elevated material platforms and mezzanines. The gate closes up against your material effectively protecting the mezzanine edge until the material is off loaded or the pallet is removed from the opening. Then the gates spring closed, all the time protecting the opening. Toeboards are also included with every gate order.

NOTE: The Stainless Steel finish is available for the same size gates as below, and are made-to-order items. To request quotes and pricing for the Stainless Steel finish gates, please Request a Quote or call us at (951) 465-7386.
SKU: PSD-PALLETGATE Category: Tag:

Description

The Pallet Self-Closing Mezzanine Safety Gate is the answer for your elevated material platforms and mezzanines. The gate closes up against your material effectively protecting the mezzanine edge until the material is off loaded or the pallet is removed from the opening. Then the gates spring closed, all the time protecting the opening. Toeboards are also included with every gate order.


FEATURES & BENEFITS

IMPROVES EFFICIENCY
Self-closing so you can forklift your materials to the mezzanine and simply back away.

HELPS KEEP EMPLOYEES SAFE
Acts as a safety railing when not in use to protect crew members from mezzanine falls.

SELF-CLOSING
Two paired gates will self-close as soon as product is pushed through and act as a safety railing. The gates are designed to swing in one direction (inward).

USER-FRIENDLY
The forklift operator can just push product through the gate without needing an additional person at the mezzanine level to operate the gate.

SAFETY
Besides exceeding OSHA safety requirements the Pallet self-closing safety gate has features such as toe boards, gates only open inwards to provide a safe means for you to receive product on your mezzanine.

OSHA STANDARDS
Designed to comply and meet OSHA 1910.29(b) and ANSI A1264.1-2017 requirements for loading and dimension.

**CAUTION WARNING** This is a fall protection system. The system must be used in strict conformance with the manufacturer's instructions. Failure to do so may result in serious injury or death. You can download the system manuals from the 'Downloads' tab. You are also encouraged to contact us in case of any questions.

Item Number
(SKU #)
Clear
Opening Width
Swing Clearance Overall Gate Width
Post-to-post
Weight
(lbs.)
PSD-PLG-60-PCY 60″ 36 1/2” 70 3/4” 200
PSD-PLG-60-SST
Made-to-order
60″ 36 1/2” 70 3/4” 200
PSD-PLG-72-PCY 72″ 42 1/2” 82 3/4” 220
PSD-PLG-72-SST
Made-to-order
72″ 42 1/2” 82 3/4” 220
PSD-PLG-96-PCY 96″ 54 1/2” 106 3/4” 250
PSD-PLG-96-SST
Made-to-order
96″ 54 1/2” 106 3/4” 250

PCY – Powder Coat Safety Yellow, SST – Stainless Steel
Custom sizing available up to 96″ only, please call or email us.

60 inch Gate (reference only) 72 inch Gate (reference only) 96 inch Gate (reference only)
Pallet Self-Closing Safety Gate - 60" Drawing Pallet Self-Closing Safety Gate - 72" Drawing Pallet Self-Closing Safety Gate - 96" Drawing

The toeboard for the Pallet gate closes the gap between the mezzanine floor and the pallet gate, preventing debris and other material from falling from the top mezzanine floor. * Toeboards are included with every gate order.

Pallet Self-Closing Safety Gate - Toeboards

  • Material:
    • Standard Dimensions: 60″, 72″ or 96″ opening width
      (custom widths up to 96″ available upon request)
    • Gate Arm: Formed 1-1/4″ square, 11-gauge tubing, self-closing
    • Gate Columns: 3″ square, 3/16” wall tube
    • Teardrop Sheeting: 16-gauge
    • Toeboard: 16-gauge adjustable toeboard
    • Gate Operation: Allows for 90° travel
  • Finish:
    • Finish on all exposed surfaces to be powder coat safety yellow or stainless steel (304), unpainted.
  • Hardware:
    • Hinge Bracket: Standard, pivot bracket.
  • Installation:
    • Mounting Bracket: 10-gauge, formed 8″ x 10-1/2″ angle bracket with integral support post connection.
    • Hinge Springs: Torsion type, stainless steel. Includes four (4) springs per gate, housed within hinge pivot.
  • Performance Rating:
    • o Gate shall meet or exceed OSHA requirements, relative to dimensions and loads, at the time of manufacture.
  • OSHA Standards:
    • The pallet gate is designed to comply with OSHA 1910.29(b) and ANSI A1264.1-2017 standards.

By providing some basic information, we can provide you with a custom quotation or more product information.
If you prefer to speak with a fall protection expert just call us at (951) 465-7386 x 303 or email us at [email protected]

These application and system specific forms are highly customized to help you provide system specific information about your fall protection requirements.

Related Products