Vertical Opening Mezzanine Safety Gate

The Vertical Opening Mezzanine Safety Gate is ideal for applications that have limited horizontal space. The vertical opening design gives you the ability to have the same protection as your railing system. You don’t have to give up a safe work environment for the sake of productivity.

The gate simply slides via manual or automated operation. Once the material has been delivered to the mezzanine, the gate closes by a timer or another activation device. Designed to meet federal OSHA standards 1910.28 and 1910.29.

FEATURES & BENEFITS

ENHANCED SAFETY
Once installed on your mezzanine, this durable gate opens and closes as needed. Open the gate to easily forklift materials to your elevated space and close the gate to protect employees from dangerous and costly workplace falls.

CORROSION RESISTANT
Available in Powder Coat Safety Yellow and Stainless Steel finish.

OSHA COMPLIANT
The Mezzanine Gate is designed to meet Federal OSHA requirements for standard railings. The gate is 42″ high with a mid-rail and a 4″ toe board.

DECK MOUNTING OPTIONS
On-deck mounting requires only 6″ of deck space along the width of the gate, or may be mounted off-deck requiring no deck space.

OPERATING OPTIONS
The gate is available in manual, electrical, pneumatic with electrical activation and full pneumatic (sparkless environments) operation options. Additional enhancements such as wireless control, warning horn and activation sensor are also available. Review the product cut sheet for more details.

TECHNICAL DATA

• Gate Material: 1-1/2″ square, 11-gauge tube, factory welded; solid horizontal top rail and mid-rail, 4″ high toeboard, 42″ overall height, and vertical members not to exceed 96″ on center. Vertical guide column assembly shall consist of tubular columns (120″ standard length), prepped for the gate operating hardware and applicable mounting brackets; guide assemblies shall be fabricated to allow gate to bypass idler sheaves to utilize full installation height.
• Finish:
  • Mild steel: Powder coat yellow on all unfinished exposed surfaces.
  • Stainless steel: 304-2b. Mill finish/unpainted on all unfinished, exposed surfaces (call us for a quote on this finish).
• Hardware: Gate to have four (4) non-corrosive guide bearings, which require no lubrication.
• Mounting: Mounting location: Deck mount (standard) or face mount.
• Performance Rating: Gate shall meet or exceed OSHA requirements, relative to dimensions and loads, at the time of manufacture.