Counterweight Roof Top Anchor
The Non-Penetrating Counterweight Roof Top Anchor for a single user provides a tie-off point for personnel working on flat roofs or structures. The OSHA compliant roof anchor comes with a D-ring included for tying off your lanyard to the anchor. The Non-Penetrating Counterweight Roof Top Anchor does not require attachment to a working surface and provides a safe and versatile fall arrest rated tie-off point.
PLEASE NOTE: Choose from the tie-off equipment below (Self-retracting Lifeline or Lanyard) based on calculations of fall clearance found in the instruction manuals.
Original price was: $5,813.00.$5,284.00Current price is: $5,284.00.
- System Description
- Components
- Requirements for Use
- Assembly Steps
- Accessories
- Downloads
- REQUEST QUOTE
Description
The Non-Penetrating Counterweight Roof Top Anchor for a single user provides a tie-off point for personnel working on flat roofs or structures. The OSHA compliant roof anchor comes with a D-ring included for tying off your lanyard to the anchor. The Non-Penetrating Counterweight Roof Top Anchor does not require attachment to a working surface and provides a safe and versatile fall arrest rated tie-off point.
The OSHA compliant Roof Fall Protection system is easy to install, practical and user friendly for your roof safety needs.
High strength and durability to stand up to the toughest environments
Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2 to 1 safety factor.
Features & Benefits
- Non-penetrating design does not attach to the working surface, reducing the possibility of damage
- Built-in shock absorbing post provides added safety to user and structure
- Complete with sixteen 45 lb. (20 kg) counterweights – includes four PVC coated base plates
- Fall arrest and restraint rated for one worker for jobsite versatility
- Swiveling Eye integrated into the assembly allows the worker to move freely 360°
- Approved for use on these roof types: concrete, bitumen membrane, asphalt sanded and asphalt stone chippings
- Meets OSHA 1910.140, OSHA 1926.502 requirements
- CE certified to EN795:1996 Class E for 1 user
- PVC-coated Base Plates offer increased durability, longevity and slip resistance
- Ideal for use on flat surfaces up to a maximum of 5 degrees slope/pitch
- Counterweights are 20kg (45lbs) each and come with an integral carrying handle for easy transport and set-up
- Lifting Sling is available for easy relocation of the Counterweight System on a roof
 |
Counterweight Roof Top Anchor (CSS-2100185) – The roof top fall arrest and fall restraint anchor a non-penetrating anchor. |
| Leading Edge Lanyard OR Leading Edge Self-retracting Lifeline – Only approved fall protection equipment can be used to tie-off to this roof anchor system. Leading Edge Lanyard: Buy Individually → Leading Edge Self-retracting Lifeline: Buy Individually → (This equipment can also be purchased separately in the ‘Accessories’ tab) |
|
| Full Body Harness w/ Back D-rings (All Sizes) – An approved Full-body Harness is required when using this roof anchor system. Buy Individually → (This equipment can also be purchased separately in the ‘Accessories’ tab) |
Below is only an excerpt of the requirements for us. Please refer to the Manufacturer’s User & Instruction Manual in the ‘Downloads’ tab to find full and complete information about the Counterweight Roof Top Anchor system.
- Weight of System: The complete system weighs 735 lbs. (334 kgs.) without any tie-off options and is assembled on site.
- Fall Arrest: The structure to which the Anchorage Connector is installed on must sustain static loads applied in the directions permitted by the Fall Arrest System of at least: 5000 lbs. (22.2 kN).
- Fall Protection Only: This Anchorage Connector is for connection of Fall Protection Equipment. Do not connect Lifting Equipment to the Anchorage Connector.
- Weather: The Counterweight Roof Top Anchor must not be used in adverse weather conditions. The roof surface must be free of frost, snow, standing water, grease or oil, or any other type of lubricating or friction reducing materials.
- Location of Anchor: Determine the proper location of the Roof Top Counterweight Anchor. It must be flat (5° slope or less) and be at least 8 ft. (2.5 m) away from the edge of the structure or any openings such as skylights or doorways, and as close as possible to the work area. (Fig. 7 in User & Instruction manual)
Below is only an excerpt of the assembly instructions for the system. Please refer to the Manufacturer’s User & Instruction Manual in the ‘Downloads’ tab to find full and complete assembly information for the Counterweight Roof Top Anchor system.
-
Anchor & Ladder Accessories, Counterweight Horizontal Lifeline Accessories, Counterweight Roof Top Anchor Accessories, Freestanding Horizontal Lifeline Accessories, Full Body Harnesses, Portable Vacuum Anchor Accessories, Single Anchor Accessories3M Delta Vest-Style Harness, Back D-ring, All Sizes
Original price was: $206.00.$187.00Current price is: $187.00. CSS-HARN-1 -
Counterweight Roof Top Anchor Accessories, Fixed Roof Anchors Accessories, Leading Edge Lanyards3M EZ-Stop Leading Edge Lanyard, 6 ft. (1.8m) Single-leg, Snap Hook, Orange
Original price was: $290.00.$264.00Current price is: $264.00. CSS-1246066
By providing some basic information, we can provide you with a custom quotation or more product information.
If you prefer to speak with a fall protection expert just call us at (951) 465-7386 x 303 or email us at [email protected]
These application and system specific forms are highly customized to help you provide system specific information about your fall protection requirements.
