safetyrail

Filter

Product categories

Filter
  • Sale! Toeboard for Pit End-Rails (Fixed Lengths)

    Toeboard for Pit End-Rails (Fixed Lengths)

    SRC-TOEBOARD-FINISH

    Fixed Mounted Guardrails - Finishing RailingWhen people are working in the vicinity of a leading edge where there is imminent danger of kicking something off the roof or elevated platform onto someone below, toeboards must be incorporated into the fall protection railing system. At CAI Safety Systems, we offer steel toeboards to prevent debris falling off the roof.

    NOTE: End-Rail Toeboards for ‘Top Floor Mount Brackets‘ are available but made-to-order items. Lead time for these will be 5-7 weeks
    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Fixed Mounted Adjustable Railings - Safety Yellow

    Standard & Pit Adjustable Railings – 3ft. to 5ft. & 6ft. to 10ft.

    SRC-ADJRAIL

    Standard & Pit Adjustable Railings are used with the Floor and Parapet Mount Brackets of the Fixed Mounted Guardrail system setup. Choose from an adjustable rail size of 3ft. to 5ft. or 6ft. to 10ft. and finishes of Powder Coated Safety Yellow or Galvanized.

    Difference between Standard rails and Pit rails ?

    Standard Rails: These rails mount onto the ‘Top Floor Mount Bracketand are 42 inches tall to meet OSHA requirements. Pit Rails: These rails mount onto either the Side Flush Mount Bracket‘ or ‘Wrap-Over-Edge Mount Bracket‘ and are 48.06 inches tall. The reason for these rails being taller is because about 6 inches of the rail is tucked into the bracket mount on the side wall or parapet. Thus, the height of the rail from floor/roof level up is 42 inches which meets OSHA requirements.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Fixed Mounted Guardrails with Bracket Mounts

    Fixed Mounted Guardrails

    $0.00
    SRC-FIXEDMOUNTED

    Fixed Mounted Guardrails with Double BracketsOur Fixed Mounted Guardrails are ideal choices for fall prevention at loading docks, roof parapet walls and many other leading edge hazards. This system is OSHA, CAL-OSHA, & WA-OSHA Compliant.

    TIP: Please refer to the tab ‘Selections Explained‘ & ‘Correct Usage‘ tabs on this page below for help and information with the selections below.
    Add Again
  • Sale! Permanent Warning Lines - Finishing Kit

    Finishing Kit (Corner/Open End Outrigger Rail & Base Plate)

    SRC-FKIT-WLINES

    If the warning line system is going to have open ends or corners, you will need an outrigger rail and base at each open end. This finishing kit will provide you with the outrigger railing and base to close each open end or corner of your permanent warning line system.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Fixed Mounted Guardrails - Finishing Railings Powder Coated Safety Yellow

    Standard & Pit End-Rails 2ft. – 10ft.

    SRC-FRAIL

    Standard & Pit End-Rails for the Fixed Mounted Guardrail system, is used at the end of a guardrail system setup, typically at the ends to guard small spaces. Choose from sizes of 2ft. up to 10ft. and finishes of Powder Coated Safety Yellow or Galvanized. Pipe sections are 1 1/4” schedule 40 pipe.

    Difference between Standard rails and Pit rails ?

    Standard Rails: These rails mount onto the ‘Top Floor Mount Bracket‘ and are 42 inches tall to meet OSHA requirements.
    Pit Rails: These rails mount onto either the ‘Side Flush Mount Bracket‘ or ‘Wrap-Over-Edge Mount Bracket‘ and are 48.06 inches tall. The reason for these rails being taller is because about 6 inches of the rail is tucked into the bracket mount on the side wall or parapet. Thus, the height of the rail from floor/roof level up is 42 inches which meets OSHA requirements.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Fixed Mounted Guardrails - Toeboard for Standard Railings

    Toeboard for Standard & Pit Railings (Fixed Lengths)

    SRC-TOEBOARD

    When people are working in the vicinity of a leading edge where there is imminent danger of kicking something off the roof or elevated platform onto someone below, toeboards must be incorporated into the fall protection railing system. At CAI Safety Systems, we offer steel toeboards to prevent debris falling off the roof.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Fixed Mounted Railings

    Standard & Pit Railings 2ft. – 10ft.

    SRC-SRAIL

    Fixed Mounted Guardrails with Double BracketsStandard & Pit Railings for the Fixed Mounted Guardrail System setup. Choose from sizes of 2ft. up to 10ft. and Finishes of Powder Coated Safety Yellow or Galvanized. Pipe sections are 1 1/4” schedule 40 pipe.

    Difference between Standard rails and Pit rails ?

    Standard Rails These rails mount onto the ‘Top Floor Mount Bracket‘ and are 42 inches tall to meet OSHA requirements. Pit Rails: These rails mount onto either the ‘Side Flush Mount Bracket‘ or ‘Wrap-Over-Edge Mount Bracket‘ and are 48.06 inches tall. The reason for these rails being taller is because about 6 inches of the rail is tucked into the bracket mount on the side wall or parapet. Thus, the height of the rail from floor/roof level up is 42 inches which meets OSHA requirements.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Fixed Roof Warning Lines - Corrugated Deck Kit

    12″ Base w/Stanchion for Corrugated Deck Roof (Galvanized)

    Original price was: $359.00.Current price is: $349.00.
    SRC-400750

    12” Base w/Stanchion for R-Panel Roof (Galvanized)

    Add to cart
  • Sale! Fixed Roof Warning Lines - R-Panel Kit

    12″ Base w/Stanchion for R-Panel Roof (Galvanized)

    Original price was: $359.00.Current price is: $349.00.
    SRC-400749

    12” Base w/Stanchion for R-Panel Roof (Galvanized)

    Add to cart
  • Sale! Fixed Roof Warning Lines - Standing Seam Kit

    16″-24″ Base w/Stanchion for Standing Seam Roof (Galvanized)

    Original price was: $359.00.Current price is: $349.00.
    SRC-400747

    16″-24” Base w/Stanchion for Standing Seam Roof (Galvanized)

    Add to cart
  • Sale! Top Floor Mount Base

    Single & Double ‘Top Floor’ Base Mount

    SRC-TOPMOUNT

    This Double ‘Top Floor’ Base Mount is anchored to the floor securing two tube rails in an upright position, while the Single ‘Top Floor’ Base Mount secures one tube rail and acts as a Finishing Kit to start and end rail runs. These mounts are anchored on rooftops, loading docks, parapet walls, open pits or truck wells.

    This product must only be used with the Fixed Mounted Guardrail system.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Wrap-Over-Edge Mount Base

    Single & Double ‘Wrap-Over-Edge’ Base Mounts

    SRC-WRAPOVERMOUNT

    This Double ‘Wrap-Over-Edge’ Base Mount wraps around the edge of the parapet wall securing two tube rails in an upright position, while the Single ‘Wrap-Over-Edge’ Base Mount secures one tube rail and acts as a Finishing Kit to start and end rail runs. These mounts are anchored on rooftops, loading docks, parapet walls, open pits or truck wells.

    This product must only be used with the Fixed Mounted Guardrail system.

    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Gate & Guardrail Kit for Roof Ladder (LadderGuard)
    ,

    Gate & Guardrail Kit for Roof Ladder

    SRC-GGKIT

    The Gate & Guardrail Kit is the best non-penetrating solution yet to guarding permanent rooftop ladders and is the most economical way to provide lightweight, OSHA-compliant fall protection for permanent fixed ladder installations on buildings.

    Kit Components (based on choice of Finish) : (2) 7.5 ft. Railings, (2) Guardrail System Bases & Locking Pins, (2) Single Posts, (4) 26”-43” Adjustable Ladder Bracket Spanners , (1) 30″-36″ Adjustable Self-closing Safety Gate
    Select Options This product has multiple variants. The options may be chosen on the product page
  • Sale! Base & Stanchion (Powder-coated Yellow)

    Base & Stanchion (Powder-coated Yellow)

    Original price was: $428.00.Current price is: $416.00.
    SRC-400060

    Powder-coated yellow (1) Base Plate & (1) Steel Stanchion.

    Add to cart
  • Sale! Base & Stanchion (Galvanized)

    Base & Stanchion (Galvanized)

    Original price was: $488.00.Current price is: $474.00.
    SRC-400318

    Galvanized (1) Base Plate & (1) Steel Stanchion.

    Add to cart
  • Sale! Permanent Warning Line System
    ,

    Plastic-coated Galvanized Cable & Aluminum Pennants

    SRC-PENNANTS

    Plastic-coated galvanized cable with aluminum pennants means the permanent warning line system is built for long-term exposure to the elements.

    Select Options This product has multiple variants. The options may be chosen on the product page