Stanchion/Outrigger (Foldable) + 2 Bases
The Aluminum Non-penetrating Guardrail System is a freestanding guardrail held in place by Counterweight Bases (approx. 50 lbs. each) placed on the horizontal beam of the guardrail. This product consists of (1) Stanchion & Outrigger (Foldable) and (2) Counterweight Bases.
Counterweight Bases [PAIR]
The Counterweight/Weighted Bases are used as the counterweight to the Aluminum Guardrail outriggers. Each outrigger requires two counterweight bases including the free ends. The two counterweights are then fixed to the end of the outriggers.
Corner Adjustable [PAIR]
The Aluminum Adjustable Corner Joint is used to construct an adjustable angle bending connection between two tubes in an Aluminum Guardrail system. Two pieces are required for each corner and are provided in pairs, each for the top-rail and mid-rail respectively.
Toeboard Bracket/Connector [PAIR]
The Aluminum Toeboard Bracket/Connector is used to add a toeboard on either side of an Upright of the Guardrail system. The Toeboard connector is always used in pair and can be installed by screwing it onto the beam of the upright with the help of connectors and bolts.
Toeboard – (7.8 ft. or 2.4 m)
The Aluminum Toeboard is used to add a toeboard on the guardrail system. The toeboard is necessary when there is no parapet on the roof. The Toeboard can be installed with the help of the Toeboard Brackets/Connectors and tightening it with a screw on the beam.
The Aluminum Safety Gate is used as access door to a roof, caged ladder or hatch. The safety gate can be fitted on all three types of guardrail systems. The gate can be placed between two uprights as part of an guardrail system.
Finishing End Bracket
The Aluminum Finishing End Bracket is used to close open end rails on the guardrail system. The end bracket has two bends of 90°, and is connected to the top-rail and mid-rail with Rail Joints. We have included a pair of Rail Joints with this accessory, so that the end bracket can be attached to the existing rails at the end of the guardrail system.
90° Corner [PAIR]
The Aluminum 90° Corner Joint is used to construct a 90 degree bend in an Aluminum Guardrail system. Two pieces are required for each corner and are provided in pairs, each for the top-rail and mid-rail respectively.
Please note that rail joints are required to connect the 90° corners to the top and mid rails. Two rail joints connect one corner, so four rail joints will be required to connect a pair to your system. Rail joints are not included with this product accessory and can be purchased separately.
45° Corner [PAIR]
The Aluminum 45° Corner Joint is used to construct a 45 degree bend in an Aluminum Guardrail system. Two pieces are required for each corner and are provided in pairs, each for the top-rail and mid-rail respectively.
Please note that rail joints are required to connect the 45° corners to the top and mid rails. Two rail joints connect one corner, so four rail joints will be required to connect a pair to your system. Rail joints are not included with this product accessory and can be purchased separately.
Rail Joint [PAIR]
The Aluminum Rail Joint or Tube Joint is used to make a connection between aluminum rails/tubes, a 45° corner joint, a 90° corner joint, and a termination end bracket.
Rail / Tube – 9.8ft. or 19.6ft.$47.00 – $74.00
The Aluminum Tube or Rail of the guardrail system is the connecting element that connects all uprights together to create a fall protection barrier. Aluminum clamps are used to link each tube together and is used as a hand or knee rail. The aluminum tube is available in 9.8 ft. and 19.6 ft. lengths and can be cut to size as desired.
- Aircraft & Hangar
- Railcar & Tank Cars
- Roof & Leading Edge
- Truck, Flatbed & Tanker
- Bus & RV
- Ladder & Openings
- Loading Dock & Bay
- Tank & Water Reservoir
- Overhead Crane Rail
- Guardrail Fall Prevention
- Industrial Safety Gates
- Platforms & Gangways
- Warning Lines
- Overhead Fall Protection
- Portable / Mobile
- Portable Safety Ladders
- All Buyout Systems
- User Equipment
- CAI Custom Engineered
- Access Gangways
- Fixed Overhead System
- Hangar Positioning Bridge
- Hangar Horizontal Lifeline
- Outdoor Freestanding (Trucks)
- Outdoor Freestanding (Railcars)
- Overhead Outdoor Freestanding
- Overhead Crane Rail
- Roof Horizontal Lifeline
- Single Track Mounted Gangway
- Swing-Arm / Fold-Away
- Tank & Water Reservoir Anchor
- Tanker Truck Mounted
- System Accessories