Don Misquitta Combustion Associates Inc. 951-272-6999
Steel Non-penetrating Guardrail
Steel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Guardrail ToeboardsSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating GuardrailSteel Non-penetrating Guardrail

Steel Non-penetrating Guardrails

Our Guardrail system enables fall protection without penetrating the floor and roof surface. When properly applied the counterweight system provides an OSHA compliant fall prevention system for the roof edge, skylight, hatch, loading dock, mezzanine, elevated platform and construction site safety.

NOTE: Each guardrail kit comprises of (1) base plate, (1) rail, & (2) locking pins

If the guardrail system is going to have open ends, you will need an outrigger on each open end. The finishing kit shown in the ‘Finishing Kit’ tab below, will provide you with the outriggers to close these open ends.


Reset selections

Additional Rail System – optional


Reset selections

Additional Rail System – optional


Reset selections

Additional Rail System – optional


Reset selections
Category:

Product Description & Models

Our system of Steel Non-penetrating Guardrails enables fall protection without penetrating the floor and roof surface to secure a guardrail. When properly applied, the counterweight system provides an OSHA compliant fall prevention system for the roof edge, skylight, hatch, loading dock, mezzanine, elevated platform and construction site safety.

Features & Benefits

EASE TO INSTALL
You do not need to penetrate floors to install the Non-penetrating Steel Guardrail System. Thus, providing you considerable savings in time and installation costs.

MOBILITY
Now you can have fall protection when and where you want it. The Non-penetrating Steel Guardrail System is portable and can be dismantled/assembled as the need arises. For even greater convenience we can also provide the handy transporter.

FLEXIBILITY
The Non-penetrating Steel Guardrail Systems are versatile and can easily be configured to your specific needs. The base can accommodate up to four rails and toe plates if needed.

OVERHEAD PROTECTION
In elevated situations where there is a danger of kicking something onto someone below, OSHA requires the use of 2 x 4 sized toe board between the bases. The bases of the Non-penetrating Steel Guardrails can be retrofitted with our custom toe-boards.

SLIP RESISTANT
The base plates can be equipped with non-slip pads. The optional pads keep the base from slipping on smooth surfaces like concrete or metal. Pads also help cushion base on sensitive materials like rubber roofing.

CORROSION RESISTANT
This system comes standard with a powder coated paint finish, to provide resistant against weather elements. As an option, galvanized finish is also available.

CUSTOM ORDERS
We can provide custom engineering and fabrication for your special needs if our standard the Non-penetrating Steel Guardrail does not meet your needs.

PEACE OF MIND
We use pins with positive locks on our guardrail bases instead of setscrews. This approach allows you to visually inspect the system after assembly and be confident that it is ready for use.

If the guardrail system is going to have open ends, you will need an outrigger at each open end. The finishing kit shown below, will provide you with the outriggers to close these open ends.

Powder Coated Safety Yellow

$975.00 $926.00
Add to cart

Galvanized

$1,091.00 $1,036.00
Add to cart

  • Finishing End Kit for open-ended systems

    Finishing End Kit for open-ended systems (Powder Coat Safety Yellow)

$975.00 $926.00
Add to cart

  • Finishing End Kit for open-ended systems

    Finishing End Kit for open-ended systems (Galvanized)

$1,091.00 $1,036.00
Add to cart

  • Base Plate w/rubber pads (Powder Coat Safety Yellow)

    Additional Base Plate w/rubber pads (Powder Coat Safety Yellow)

$237.00 $225.00
Add to cart

  • Base Plate w/rubber pads (Galvanized)

    Additional Base Plate w/rubber pads (Galvanized)

$265.00 $252.00
Add to cart

  • Base Transporter with Carefree Tires - RailGuard200

    Base Transporter, with carefree tires

$308.00 $293.00
Add to cart

  • Centurion Service Cart

    Centurion Service Cart with Flatproof Tires

$3,952.00 $3,754.00
Add to cart

  • Locking Pin for Guardrail Systems

    Additional Locking Pins

$3.00 $2.00
Add to cart

  • Hand Hook, for Final Positioning of Base

    Hand Hook, for Final Positioning of Base

$74.00 $55.00
Add to cart

  • Rubber Mat for Base Plates

    1/8″ x 24″ Thick Rubber Mat for Base Plates (non-adhesive)

$27.00 $26.00
Add to cart

  • Rubber Mat for Base Plates

    1/4″ x 24″ Heavy Duty Mat for Base Plates (non-adhesive)

$34.00 $32.00
Add to cart

  • Swivel C-Clamp for Infinite Rail Angle Adjustments

    Swivel C-Clamp for Infinite Rail Angle Adjustments

$61.00 $58.00
Add to cart

  • Dual Rail Clamp (joins two vertical rail posts)

    Dual Rail Clamp (joins two vertical rail posts)

$140.00 $133.00
Add to cart

  • Full Contact Metal Plate w/Pads for B-decking

    Full Contact Metal Plate w/Pads for B-decking

$123.00 $117.00
Add to cart

  • Rough Terrain Adapter Pipe (levels rails in base)

    Rough Terrain Adapter Pipe (levels rails in base)

$55.00 $52.00
Add to cart

  • Metal Deck Standoff Plate

    Metal Deck Standoff Plate

$161.00 $153.00
Add to cart

  • Steel Guardrail Toeboards

    Short Speed Boards (Toe Boards – Fits 4′ , 5′ & 68″ Rails)

$127.00 $121.00
Add to cart

  • Steel Guardrail Toeboards

    Long Speed Boards (Toe Boards – Fits 7 1/2′ & 10′ Rails)

$147.00 $140.00
Add to cart

  • Steel Guardrail Toeboards

    Special Long Speed Board (Fits 10′-12′ Rails)

$194.00 $184.00
Add to cart

  • Steel Guardrail Toeboards

    Special Short Speed Boards (Fits 3′-4′ Rails)

$130.00 $124.00
Add to cart

Need a Custom Size? or Have a Question?
Call 888-246-6999 or Click to Email us