90° Corner Bracket [PAIR]

90° Corner Bracket [PAIR]

The aluminum 90° Corner Bracket is used to construct a 90 degree bend in an Aluminum Guardrail system. Two pieces are required for each corner and provided as a pair, each for the toprail and midrail respectively. A Rail Connector (not included) is used to connect the 90° corner bracket to the aluminum rails, and can be optionally added below.

$22.00 $20.00

OPTIONAL: Add (1) PAIR of Rail Connector(s) with your Rails. A rail connector is used to connect two rails together.

Description

The aluminum 90° Corner Bracket is used to construct a 90 degree bend in an Aluminum Guardrail system. Two pieces are required for each corner and provided as a pair, each for the toprail and midrail respectively.

A Rail Connector (not included) is used to connect the 90° corner bracket to the aluminum rails, and can be optionally added above.

PLEASE NOTE: This product accessory must be used with the ‘Aluminum Fixed Mounted Guardrails‘ system only.

Specifications:

  • Dimensions: 8′ 17/64″ x 1’ 37/64” (210 x 40 mm)
  • Weight: 0.41 lbs. (0.19 kg)
  • Finish: Aluminum

Instructions:

  • Always use a Rail Connector to attach both ends of the 90° corner bracket to Rails/Tubes.
  • In case of a 90º inner corner, the max. distance between the center of the 90° corner bracket and one of the two uprights is
    1’ 7 11/16” (500 mm). The second upright must be installed within 4’ 11 1/6” (1500 mm).
  • In case an outer corner, the max. distance between any of the uprights and the center of the 90° corner bracket is 1’ 7 11/16” (500 mm).
Aluminum Fixed Mounted Guardrails - 90 Degree Corner Bracket
You've just added this product to the cart: