45° Corner Bracket [PAIR]

The aluminum 45° Corner Bracket is used to construct a 45 degree bend in an Aluminum Guardrail system. Two pieces are required for each corner and provided as a pair, each for the toprail and midrail respectively.

A Rail Connector (not included) is used to connect the 45° corner bracket to the aluminum rails, and can be optionally added above.

Specifications:

• Dimensions: 7’ 13/16” x 4’ 11/32” x 1’ 37/64” (198.5 x 110.5 x 40 mm)
• Weight: 0.44 lbs. (0.2 kg)
• Finish: Aluminum

Instructions:

• Always use a Rail Connector to attach both ends of the 45° corner bracket to Rails/Tubes.
• In case of a 45º inner corner, the max. distance between the center of the 45° corner bracket and one of the two uprights is
  1’ 7 11/16” (500 mm). The second upright must be installed within 3’ 11 1/4” (1200 mm).
• In case an outer corner, the max. distance between any of the uprights and the center of the 45° corner bracket is 1’ 7 11/16” (500 mm).